www.usbanner.com
Dixie Neon stocks three lines of banner blanks manufactured by U. S. Banner Corporation. Poly-Pro® is an inexpensive, woven polypropylene banner that has been treated with an electro-static process to make it enamel receptive. We also stock a laminated vinyl that has been treated with an enamel receptive coating (ERC). The 13 oz. standard banners are heavy-duty material, have reinforced grommets in all four corners and are available in a wide variety of colors and sizes. The 13 oz. blockout banner is extra smooth on both sides for those jobs that require lettering on both sides. Banner products for solvent printers are located separately in this section.
US Banner Pre-Sewn Banners
|
Type |
Width *
(Ft) |
Length *
(Ft) |
Color |
|
Poly-Pro |
2,3,4 |
6 to 20 |
White, Blue, Red, Yellow |
|
10 oz ERC |
2,3,4 |
6 to 12 |
White, Blue, Red, Yellow |
|
13 oz. Standard |
2,3,4 |
6 to 20 |
White, Blue, Red, Yellow |
|
13 oz Blockout |
2,3 |
6 to 10 |
White only |
*Stock sizes range from 2' x 6' to 4' x 20'. Please call for availability. Other sizes can be special ordered and shipped one day later.
Rolled Banner Material (hemmed and grommeted)
All of US Banner's material can also be purchased in rolls. We stock the Big Foot rolls in white 10 oz. standard and 13 oz standard. These hemmed rolls have grommets every 1' and allow you to cut a banner "on the spot" to the size you need. Now you can make odd sizes (5', 7', 9', etc.) too. Finish the ends of the banner with banner tape and it is ready for vinyl.
|
Type |
Width |
Length |
Colors |
|
Big Foot 10 Oz. |
24", 33", 48" |
72' |
Assorted |
|
Big Foot 13 Oz. |
21", 33", 45" |
72' |
Assorted |
We stock white only. Other colors are available on special order.
US Banner Rolled Banner Material (un-hemmed and un-grommeted)
These banners can then be sewn or finished with banner tape – adding grommets or adhesive grommet tabs completes the job.
We carry the following material
|
Weight |
Width |
Lengths |
Colors |
|
10 oz. ERC |
27" & 36" |
25 yd. |
Assorted |
|
13 oz. Std. |
24", 36" & 48" |
40 yd. |
Assorted |
Banner Tape
This double-sided tape is great for finishing unhemmed banners. Just apply the tape to the edge, fold and the banner is ready.
|
|
www.usbanner.com
Stop sending your banners out to be hemmed, and forget sewing or heat-sealing hems in your shop. The Cyclone installs double-sided banner tape into hems fast. And, your banner hems will be neat and perfectly straight with no stitch lines—every time! Best of all, you will recoup your investment is a year or less. To view a video demonstration of the Cyclone, visit www.usbanner.com.
|
|
www.mcgillmarketing.com
The ClipsIN Banner Retaining System gives any flexible face a neat, professional look. It's not just a banner frame, it's a sign face clamping and tension system. No sewing needed! ClipsIN accepts plain cut edges right off the roll and locks your banner face into a taut position. It's easy to transport, simple to install and works for any permanent or temporary application.
Click here to learn more about ClipsIN
|
