SignComp's extensive sign extrusion systems are structurally engineered to deliver unlimited design configurations. Their systems deliver the functional and economical benefits of "standard" extrusions without the typical "cookie cutter" extruded sign box design.

SignComp's broad product line includes:

Commercial Extrusions – Engineered for flexible, rigid and aluminum face pylon and wall mount signage.

Commercial Kits – Unassembled hingeable sign cabinets and retro frame kits, Available in mill finish and pre-painted dark bronze primer/topcoat.

Architectural Extrusions – Extrusion systems engineered to execute a variety of post and panels, low profile, wall mount and monument signs as well as monolithic signage

Architectural Kits – Unassembled post and panels, wall mount and low profile signage kits.Available in mill finish and pre-painted dark bronze primer/topcoat.

Standard Products – These are industry standard products including raceways, sign cabinets, frame on frame and standard moldings.

EconoComp Kits – These are lighter-weight components that are easy to assemble with corner keys and screws.Used with rigid and aluminum faces.

Series 4  4" Round Four sided Post – This post accommodates four panels and allows for numerous panel configurations.

Ready-to-Ship (RTS) Post & Panel Systems – These systems are ready-to-ship the day you call and are ready to install. No painting, no welding!Assemble with fasteners or adhesives.

SignComp Series 4  4" Round Four-Sided Post 24' x 4"

• This post accommodates up to four different panels and allows for numerous panel configurations.
• The four slot provisions accept the Series 2/3 reveal, the Series 2/3 Panel Adaptors and the Series 3/4 radius post filler.
• The Series 2/3 reveal attaches to any SignComp panel or any material, allowing the panel to slide into the post.The Series 2/3 Panel Adaptors accept 1/8", 1/4" and 1/2" panel material.The Series 3/4 Radius Post Filler fills the post below the panel to accommodate any panel height, fills the slot provisions that are not utilized and acts as a spacer between panels.
• The slot provisions also functions as a concealed wire way.
• The center of the post accepts a standard 1-1/4" square tube when additional strength is required.

RTS (Ready to Ship) Series

SignComp's RTS Post & Panel Systems make it easy for you to offer a high quality architectural post and panel to your customers.  The posts are pre-packaged and ready to ship the day you order. With your first two-post RTS order, you will get a 6" desktop RTS display model valued at $25.00 -- or buy the model and we will credit your account $25.00 when you buy your first RTS kit.  We also offer a 44" floor model for $165.  It is available with either square or round posts - or one of each - for display purposes. 

• All RTS components are powder-coated gloss white
• 3-1/4" round or square posts are available in 96" and 144" lengths.
• Each aluminum post includes:
  -  A 48" slot to accommodate up to a 48" high, 1/8" or 3mm panel
  - One adjustable, 48" aluminum post filler to accommodate a less than 48" high panel
  - One  1/8" aluminum post cap with countersunk cap screws
  - One 96" aluminum, adjustable panel trim for 1/8" hollow core panel material
  - Two 8" locking strips 
• Face material is not included. 

Simple assembly –To assemble, just attach the locking strips to the panel material, cut the post filler to size, slide the panel into the pre-slotted post and attach the post caps.   

Length	Round Post Part #	Square Post Part #
96"	1017-8	1015-8
144"	1017-12	1015-12